Air Water Dental Prophy Polishing Sandblasting Machine

Description

Dental Prophy Polishing Sandblasting Machine

Features:- A whole gas switch with a small, light body that is simple to use. The sandblasting tank’s air filtration equipment may entirely stop moisture, oil, and gas blocks from converting to powder and forming handle or pipe blasts. Plaque, tartar, color stains, smoking stains, and tartar can all be removed with the help of water, gas, or powder without harming the gums. The handle area of the teeth and gums cannot be directly touched by the work. Water and air tubes should never be mixed. You may disassemble and clean the tip.

Anti-retraction mechanism Specification:

4-hole handpiece tube connects type.

The host is provided with simple-to-use sand water control knobs and a total air switch, making it lightweight, fashionable, and concise. The super-sized, see-through sand power tank, with a maximum power of 42g, can efficiently guarantee adequate treatment time. The one-key drying air filter device effectively stops oil and water vapor from getting into the sandblasting pipe and maintains the dentistry unit pipe’s cleanliness and hygienic conditions. Cleanup and sand removal are made simple by the split handle and removable extension pipes.

• Adjustable by the pressure switch on the treatment equipment, the air pressure should be between the useable and 3-6KG range. The machine that cleans teeth and uses sandblasting stops when the footswitches control is turned off.

Water pressure: More than 0.5KG of pressure can be used.Weight:1.5kg

• Use the blast pot and cover as directed

1. A) Will open the lid, add tank blasting powder to a height of no more than one-third of the container below the green line, and then secure the lids.
2. B) To avoid congestion, avoid blasting powder more than half the height of the tank.
3. C) Be careful not to let the interior of the lid with the filter deform.

• To drain the gas, press the button three times before each use. To drain the gas emission filter, use a powder dryer and gouache.
• Rotate the powder quantity knob in a clockwise direction (Air value).
• Adjust the water knob (water value) in accordance with the real job.

The blast switch:

1. A) When the foot switch is in the “ON” position, the powder is shot out of the nozzle handle; “OFF” closes the blasting switch.
2. B) To avoid clogging while using the blaster the following time, pull the blasting switch to the “OFF” position after each use, then step on the foot switch repeatedly.

• Main Connector: Four-hole joints are treated after high or low discharge screw connection to the host machine.